When your gears have to be right, have them inspected where your requirements can be verified and you can ensure the accuracy and precision of the finished components. TIVS offers you all-inclusive timing gear inspection solutions. The system checks for the overlap positions of the gears using specific reference points while also checking for the presence or absence of through holes.
top
  PISTON ASSEMBLY INSPECTION


TIVS offers you complete inspection solution for piston assembly. The accurately checks for presence or absence of Circlip and its position with a particular reference point with the body and presence and absence of all piston rings.
top
  VALVE ASSEMBLY INSPECTION


The Valve inspection system delivers substantial benefits to automotive engine valve manufacturers ensuring that 'total quality' is maintained in the manufacturing process their engine valves. The system offers advanced access to detailed information that provides indication that to avoid interchange of the valves and to check for the proper assembly of the valve lock. The cameras and systems are deliberately located at the entry point of this station, for two reasons: firstly, to ensure that all parts reaching final inspection are correct; secondly, to make sure that rejected parts are manually removed from the conveyor before the line continues.
top
  HYPOID GEAR INSPECTION

Hypoid gear inspection system offers accurate inspection of contact area of paired bevel gears. Programmable acceptance and rejection criteria set by the user is used to analyse the image captured by the system and raise alarm to indicate rejection. This system can match your production speed and retrofits easily into your existing production setup.
top
  DISK BRAKE INSPECTION



A dual camera inspection solution for DISK BRAKE inspection is capable of verifying and indicating if the assembly is for LH or RH and simultaneously checks for the presence and absence of split pin on the unit. Your requirements are verified and in the event of an mismatch ALARM is immediately raised to indicate rejection.
top
  METAL STAMPING INSPECTION



TIVS systems for Washer Stamping Inspection helps to determine if the given product safely meets quality standards and accordingly rejects it if it is faulty. The automatic inspection and sorting at very high speed and with high measurement accuracy offers options for stampings to be inspected for visual defects like dents, cracks and burrs. Consequently the system also offers options to check whether for whether the punch is missing or not.
top
  INJECTION DIE INSPECTION



A Dual Camera inspection solution offering by TIVS for Injection Die inspection, critically checks for the accurate projection of the tip, presence / absence of the washer and its thickness, presence / absence of metal ball, banjo bolt and retaining screw. If die assembly does not meet your stringent requirements, the system immediately raises an ALARM indicating faulty condition.
top
  BALL BEARING INSPECTION



TIVS Bearing Inspection system offers a unique accurate, reproducible, and robust inspection of bearings. The inspection system detects whether a rivet or ball is missing. It also ensures that there is a comprehensive detection of surface defects on internal surfaces along with surface defects on the top and bottom surface. It also checks for the presence or absence and positioning of characters. The system also detects scratch mark defects and offers the option to provide a flexible calibration of the scratch mark. The system is a valuable tool for ensuring high-end-product quality.
top
  NEEDLE BEARING INSPECTION



TIVS Needle Bearing Inspection system offers a unique accurate, reproducible, and robust inspection of bearings. The inspection system detects whether a needle/s is missing. It also ensures that there is a comprehensive detection of surface defects on internal surfaces along with surface defects on the top and bottom surface. It also checks for the presence or absence and positioning of characters. The system also detects scratch mark defects and offers the option to provide a flexible calibration of the scratch mark. The system is a valuable tool for ensuring high-end-product quality.
top
  SPLIT BEARING INSPECTION



TIVS Split Bearing Inspection system offers a unique accurate, reproducible, and robust inspection of bearings. The inspection system checks for dimensional accuracies as well as profile parameters. It also ensures that there is a comprehensive detection of surface defects on internal surfaces along with surface defects on the top and bottom surface. It also checks for the presence or absence and positioning of characters. The system also detects scratch mark defects and offers the option to provide a flexible calibration of the scratch mark. The system is a valuable tool for ensuring high-end-product quality.
top
  FUEL TANK LOCK INSPECTION



TIVS fuel tank lock Inspection system checks the assembly for presence / absence of all components i.e.: screws, position of retaining rings, notch, relief hole, back washer and hinges. The system easily retrofits the assembly line and an automated rejection system removes defective assembly.
top
  CASTING INSPECTION



The cast extrusion manufacturing process is an initial step which enables the creation of the certain base components needed for the engine. Casting defects can often seriously affect the inner workings of the engine. However, due to the fact that the defects are small in size and hard to visualise detecting them can often be quite an issue. TIVS Automotive Casting Inspection systems offer an automated visual inspection system for the online detection and analysis of surface and inner defects in the production of automotive casting products. The system possesses to ability to detect the profile of wheel-casting to avoid mix-up of products. It can also detect the thickness of the casting sample from a side-view while offering to inspect the depth at one point using a laser smart sensor.
top
  PISTON RING INSPECTION



TIVS Automotive Piston Ring Inspection systems offer an automated visual inspection system for the online measurement analysis of piston rings. The system possesses to ability to detect the dimensional accuracies of the rings. The automated rejection system ensures removal of faulty components from the production line.
top
  RIM INSPECTION & TYRE PROFILE INSPECTION



Tyres form key components for vehicle safety and driving comfort. Over time, their technology has become extremely sophisticated and their manufacture requires great precision, as the slightest distortion in fitting makes them unsuitable for use. TIVS offers solutions that inspect the tyres on the manufacturing line and with complete reliability and high precision measures any distortion which helps to remove defective tyres. The solution provides detailed inspection of the Tyre Threads and Sidewall. This strategy has the two-fold purpose of improving the efficiency of quality control and to generate appreciable savings from the fact that the defective assemblies are detected very early in the production process and removed before they are subject to other processes.

top